1060 Aluminum Strip for Injection Vial Seals
1060 aluminium plain strip, aluminium lacquered strip for Injection vial seals.
Signi aluminium offer 1060 aluminum strip for injection vial seals since long time ago, because 1060 strip is easy to make and cheap price, in many countries 1060 strip for injection vial is still very common, signi aluminum could offer plain aluminum strip, lacquered aluminum strip, coated aluminum strip in color of golden, white, red, blue, black etc, one sides color, both sides lacquered etc.
 |
 |
Alloy: 1060
Temper: O
Thickness: 0.17-0.23mm
Width: 50-900mm
Coil ID: 76mm 152mm
Surface Type:
a.Plain mill finish aluminum strip
b.DOS oil lubricated finish
c.Chromated finish
d. One side golden/white/red/blue/black,etc other colored, other side protective lacquered
e. both sides clear/transparent lacquered
Test item: autoclave test, Hgcl2 test
Tensile strength: 65-95mpa
Elongation: 20%
Earring: 2% Max
Packing: export standard wooden boxes
Application:
vial aluminium seals,aluminium tear off seal,aluminium flip-off vial seals, aluminium closures, pharmaceutical caps, pull-off aluminum cap, aluminum seal cap for injection vial,aluminum cap for injection bottle.
 |
|
| Chemical Composition | ||||||||||||
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Other | Aluminum | |
| Each | Total | |||||||||||
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | 0.03 | 0.03 | - | 99.6 |
| Temper |
Thickness mm |
Tensile Strength Rm MPa |
Yield Strength Rp0.2 MPa |
Elongation % A50mm |
Bend Radius |
Hardness HBWa |
|||
| O | 0.2 | min. | max. | min. | max. | 180° | 90° | ||
| 65 | 95 | 20 | 20 | 0t | 0t | 20 | |||
