Aluminum medical bottle cap material

Introduction of Aluminum medical bottle cap material
As the aluminum caps used for medical bottle caps, the requirements for Aluminum medical bottle cap material are more stringent, and the material layout must be flat, free of roll marks, scratches and stains. The general thickness is 0.20mm-0.23mm, and the width is 449mm-796mm.
 
Special properties of Aluminum medical bottle cap material:
A: Width and thickness tolerances are implemented according to the requirements of the process card
B: The surface is smooth, free of defects such as cracks, bubbles, penetrating pores, metal and non-metal pressing, light and dark stripes.
C: During the rolling process, the surface quality should be checked at least once every 3 coils, and the surface quality should be checked for each coil of the finished product pass.
 
Surface quality of Aluminum medical bottle cap material:
The surface of the Aluminum medical bottle cap material is flat, without bright spots, roller marks, grinding wheel marks and black lines.
The surface of the Aluminum medical bottle cap material is clean, free of corrosion marks, oil stains, wrinkles, seams, scratches, light and dark lines, rubber roller prints, vibration marks, diagonal lines, etc.